Tag Archive for: Trace Software International
elec calc ™: 2023 innovations for tertiary and industrial buildings
/0 Comments/in Blog, News/by claraarchelios™ PRO, new version : serving self-consumption and performance
/in Blog, News, Nouvelle version, Tips & tricks archelios/by claraManaging the BS Safety standard in electrical installations?
/0 Comments/in Blog, News, Tips & tricks, Tips & tricks elec calc/by claraelec calc™ Project : online collaboration for elec calc™ projects
/0 Comments/in Blog, News, Nouvelle version, Tips & tricks elec calc/by karinearchelios™ Suite 2022: new version
/in Blog, News, Nouvelle version, Tips & tricks archelios/by charlotteelec calc™ 2022: a revolution in building electrical design
/0 Comments/in Blog, News, Nouvelle version, Tips & tricks elec calc/by charlotteCooperation between Trace Software and K2 Systems: archelios™ PRO PV Software integrates data from K2 Base software
/0 Comments/in Blog, News, Tips & tricks archelios/by RossanaEPU – Trace Software supports Electric Power University’s educational program in Vietnam
/0 Comments/in Blog, News/by charlotteCHINT – Trace Software: A strategic cooperation agreement around elec calc™ software solution
/0 Comments/in Blog, News/by karineTag Archive for: Trace Software International
ONLINE training – archelios™ PRO
/in Formation/by karine
archelios™ PRO online training
With archelios™ PRO size any type of photovoltaic project, wherever you are.
archelios™ PRO online training
The archelios™ PRO online training session is designed to provide you with the maximum productivity in your photovoltaic projects.
At the end of the training, users must understand the methodology and apply the different options available to optimize the design process and to improve productivity.
Description
Goal
The aim of the archelios™ PRO online training session is to train the users to handle the use of the PV application.
Audience
This course is aimed at designers, PV installation managers, commercial engineers, design office staff.
Pedagogy
The trainer follows a theoretical and practical program, and explains all the functions of the application and the design approach of a photovoltaic installation.
Prerequisites (not covered during training)
A good knowledge of the sizing of a photovoltaic installation and the different EU guides.
Content
All theoretical notions will be illustrated with concrete case studies on the archelios™ PRO application.
Next training session: 24-25 December 2021
Training program
- archelios™ PRO online project design – Photovoltaic array configuration
- Creating archelios™ PRO projects with Sketch-Up plugin
- Understanding the parameters of orientation, inclination…
- Roof-mounted and ground-mounted systems
- Shading studies
- Photovoltaic array management, inverter association, cabling
- Bi-directional gateway with SketchUp
- Wiring in SketchUp.
- Production forecast calculations
- Self-consumption studies
- Economic feasibility studies
- Reports: PDF, CSV, DXF…
- Gateway to archelios CALC
- Comparison of projects
- Management of manufacturer’s reference database
- Support
For the training to run smoothly, the TEAMS application must be installed on your workstation.
Maximum 8 trainees.
Duration of the course divided into 2 half days to fit with different time zones.
PRICE
6 hours of exclusive online training course: 590 eur (price/pers)
To register, please fill in the form below:
You may unsubscribe at any time. Trace Software value your privacy and will not sell your personal information to any Third Party.
Trace Software may only share your personal information with its subsidiaries and partners in order to respond to your inquiry. In accordance with French law, our database is registered with CNIL (French Data Protection Authority) under no 1528032 and you can access and correct information entered: Trace Software International, Parc Eco-Normandie, 76430 St Romain de Colbosc, France.
Logiciel elec calc™ BIM : intégrer le calcul d’installations électriques dans un processus Open BIM
elec calc™ BIM est un logiciel qui permet d’intégrer le calcul électrique dans un processus Open BIM, en privilégiant la communication avec les différents intervenants grâce aux formats standards de collaboration IFC et BCF.
Avec elec calc™ BIM, l’utilisateur peut appuyer ses calculs sur un modèle numérique au format IFC 4, généré par les différents logiciels d’architecture 3D (Revit, ArchiCAD, SketchUp …).
Pour les utilisateurs REVIT, le Plugin elec calc™ BIM permet d’optimiser la collaboration entre les deux logiciels. La compatibilité avec les objets électriques disponibles sur la plateforme BIM&CO est également un atout important pour l’intégration et le calcul des produits de fabricants.
elec calc™ BIM offre des possibilités de routage de câbles uniques. L’utilisateur calcule les longueurs de câbles qui sont générés dans la maquette numérique. Plusieurs simulations peuvent être effectuées pour comparer les scénarios de routage. Le modèle 3D permet la détection des conflits et la technologie BIM Collaboration Format (BCF), qui est intégrée au logiciel, permet de gérer la communication et les alertes avec les autres corps de métiers.
Le logiciel fournit aux ingénieurs, installateurs, développeurs, producteurs ou distributeurs d’énergie et fabricants d’appareillage électrique un outil puissant pour le dimensionnement des installations électriques.
Cet outil intègre les modèles de calcul reconnus comme les plus performants du marché dans le domaine de la conception, ce qui vous donne l’assurance d’une rapidité de développement et des résultats de haute précision dans vos projets.
Vous souhaitez télécharger la brochure ? Il vous suffit de remplir le formulaire ci-dessous :
©2017 Copyright – Trace Software International